Dies ist eine alte Version des Dokuments!
Shoplink
bill of materials
Solder the pcb in this order
| Anzahl | Bezeichnung | Wert |
|---|---|---|
| 2 | IC1, IC6 | Socket 8-pin |
| 1 | IC2 | Socket 20-pin |
| 1 | IC3 | Socket 28-pin |
| 1 | IC5 | Socket 40-pin |
| 3 | Q1-Q3 | Socket-Pins für crystals |
| 4 | RESET, S1-S3 | Push-button |
| 2 | R1, R2 | Poti 50k |
| 1 | SPKR1 | Buzzer |
| 2 | C14, C15 | Elko |
| 1 | ISP-6 | IDC-header 6-pin |
| 2 | ISP-10, JTAG | IDC-header 10-pin |
| 1 | EXTENSION | IDC-header 40-pin |
| 3 | LED1 | LED red |
| 1 | LED2 | LED green |
| 2 | ISP, PWR | cut pin-headers |
| 2 | SERIAL, ADC | cut pin-headers |
| 1 | EEPROM | cut pin-headers |
| 1 | X1 | USB-B-connector |
All SMD-parts are mounted already!
Circuit
assembly-plan
Integrated testhardware
The aTeVaL-board comes along with some great pieces of testhardware. This is really great for your first experiments in the world of microcontroller.
This hardware is connected as shown here:
| Name | Attiny13 | Attiny2313 | Atmega8 | Atmega16 |
|---|---|---|---|---|
| LED 1 | X | PD6 | PD6 | PD6 |
| LED 2 | X | PD5 | PD5 | PD5 |
| Taster 1 | X | PD2 | PD2 | PD2 |
| Taster 2 | X | PD3 | PD3 | PD3 |
| Taster 3 | X | PD4 | PD4 | PD4 |
| Poti 1 | X | X | PC1 (ADC1) | PA1 (ADC1) |
| Poti 2 | X | X | PC0 (ADC0) | PA0 (ADC0) |
| Summer | X | X | PD7 | PD7 |
Furhter information
You can find a lot of other information here in the howto-article for the aTeVaL-board.
